Let Us Customize Your New Maas Boat

We can build a boat just for you, and we can select from a range of colors and graphics. Have fun playing with different options to design a perfect boat.

COLOR

Colored gel coat can be used for your deck, your hull or both. This means you can have a colored deck on a white hull, a colored hull with a white deck (perhaps with other graphics on the deck), or both the deck and hull in a color other than white.

Generally, darker colors mean your boat will be heavier. This is because a dark gel coat must be applied thicker to ensure a true color. Yellow boats are the heaviest... though many feel they are also the prettiest! In addition, dark colors attract and show scratches. So, we recommend that dark colors (like black, red or blue) be used over relatively small areas.

Addition of colors costs $125.

GRAPHICS

Graphics are done with gel coat in the mold when the boat is built, and they are permanent and flush with the base color. They add color and make your boat distinctive without adding significant weight.

Centerline pinstripe(s): these extend from the bowball to the cockpit on the fore deck and from the end of the cockpit behind the stretcher to the stern on the aft deck. They are available on the Aero, 24 and Flyweight in any of the Maas colors. Double and triple pinstripes are possible. Cost for the double stripe is $135, and the triple stripe is $200.

Center line pinstripe

Cockpit Side with double pin on fore and aft decks: Available only on the Aero, this graphic extends the color from stem to stern without a break. Cost is $225.

Cockpit Bevel with double pin on foredeck: Available only on the 24, this graphic extends the color of the pinstripe along a two inch wide bevel on the side of the cockpit. Cost is $165. Here is an example....

Cockpit bevel with double pin on fore deck

Cockpit Bevel with double pin on fore and aft decks: Available only on the 24, this graphic extends the color of the pinstripe the full length of the cockpit. Cost is $245. Here are two examples ....

   
Cockpit bevel with double pinstripe fore and aft.

Cockpit stripe.

Cockpit Stripe: Available on the Aero and 24, this is a subtle use of pinstriping to extend a line (or lines) from the bow along the centerline of the decks with a single line defining the top edge of the cockpit. Cost is $165.

Steffy Stripe: Available on the Aero and 24 only, this is a double pinstripe from the bow to the peak of the cockpit at which point the pinstriping splits along both sides of the cockpit. At the aft end of the cockpit, the inner stripe follows the top edge of the cockpit to connect to the other side. Cost is $245.

Border Stripe: Available on the Aero and 24, this is a bold stripe along both borders of the deck from the bow to the stern. Cost is $285. The photo below is an example ....

Border Stripe

Shirwin Stripe: Stripe color is in the cockpit then straight onto the deck toward the stern. Seat and footstretcher are usually the same color as the cockpit. Available on the Aero, 24 and Flyweight. Cost is $225. Here are two examples ....

Shirwin Stripe

Insert Stripe: This is the reverse of the Shirwin Stripe, so the stripe color is only on the deck... mainly toward the bow. Available on the Aero, 24 and Flyweight. Cost is $245. Here's an example...

Insert Stripe

Cockpit only: Stripe color is used only within the cockpit, including the seat and stretcher. Cost is $275.

NOTE: We’ve purchased a pail of “Bubble Gum Pink” gel coat as a special order, and we have enough left over to build a few more boats with pink striping. Hurry if you want to add this unique color to your new boat.

For more information on any of our services, contact us today.